Home > Products > Digital Contact Sensor > Digital display type > Digital display type > MT1 Series > Model > OW-PN2

Digital Contact Sensor

Digital display typeMT1 Series

PROFINET network communication units

Other Models

OW-PN2

Specifications

Model OW-PN2
Standard-compliant IIEEE802.3u (100BASE-TX)
Transfer speed 100 Mbps (100BASE-TX)
Transmission medium STP or category 5+ UTP cable
Distance between nodes 100 m
Communication port RJ-45×1
Support function Cyclic communication (data I/O communication),acyclic communication (recording data communication)
Connectable IO controllers 1 
Update time 2 to 512ms
GSDML version V2.3
Applicable protocols LLDP DCP
Connectable devices/units 15 units
Connection type Connected to the end of the controller
Indicator lamp SF: (green light) On - system fault detected; Off - no PROFINET faults
READY: (green light) On - communication function is ready; blinking - internal host abnormality
o-bus: (green light) On - self-test exception; Off - self-test passed or other customization
BF: (green light) blinking - abnormal bus communication; Off - normal bus communication
Link/Activity indicator
Power voltage 24VDC incl. 10 % ripple (p-p) powered by controller
Power consumption(communication module body) Xx mW
Ambient temperature -20 to +55℃( no freezing
Relative temperature 35 to 85%RHno condensation
Vibration resistance 10 to 55 Hz, 1.5mm double amplitude 2 hours each in X/Y/Z direction.
Material Polycarbonate
Weight 40.5g

You may also be interested in the following informationView more>>


Recommended Content

Home > Products > Digital Contact Sensor > Digital display type > Digital display type

Digital Contact Sensor

View more >
×

Login

Forgot your password/Username?Register