NPN output
Model | LA2-WS300N | LA2-W500N | |
Type | Cable type | ||
Output type | NPN | ||
Detecting distance | 30~300mm | 30~500mm | |
Minimum spot diameter |
Variable spot Approx. Ф2±0.2 mm at 90 mm Approx. Ф5±0.5 mm at 200 mm Approx. Ф7±0.8 mm at 300 mm |
Variable spot Approx. Ф3.5±0.2 mm at 100 mm Approx. Ф9±0.5 mm at 250 mm Approx. Ф18±1 mm at 500 mm |
|
Response time | 200us / 1ms / 10ms / 100 ms / 500 ms switching type | ||
Light source | White LED | ||
Reduction of mutual interference frequency |
Setting of different frequencies, max. 2 units*¹ | ||
Timer | OFF / turn-on delay / turn-off delay / single time | ||
Power voltage | 12-30VDC±10% | ||
Current consumption |
Less than 65 mA at 24V (without load) Less than 120 mA at 12V (without load) |
||
Control output*² |
NPN open collector/PNP open collector Switching type 30 V or less, 50 mA or less Residual voltage 2 V or less N.O./N.C. switching type |
||
External input*² | Tuning/stopping Switching type | ||
Protection circuits |
Power reverse connection protection, power surge protection, output overcurrent protection, output surge protection, output reverse connection protection |
||
Enclosure protection class | IP65/IP67 (IEC60529) | ||
Ambient light | Incandescent:below 10000Ix Sunlight:below 20000lx | ||
Ambient temperature | -20 to +50°C (no freezing) | ||
Relative humidity | 35 to 85% RH (no condensation) | ||
Shock resistance | 1,000 m/s² 6 times in each direction X, Y, Z | ||
Vibration resistance | 10 to 55 Hz Dual amplitude 1.5 mm 2 hours in each direction X, Y, Z | ||
Cable length (mm) | 2000 (Highly flexible drag chain type) | ||
Material | Zinc alloy | ||
Weight | Approx. 170 g |
PNP output
Model | LA2-WS300P | LA2-W500P | |
Type | Cable type | ||
Output type | PNP | ||
Detecting distance | 30~300mm | 30~500mm | |
Minimum spot diameter |
Variable spot Approx. Ф2±0.2 mm at 90 mm Approx. Ф5±0.5 mm at 200 mm Approx. Ф7±0.8 mm at 300 mm |
Variable spot Approx. Ф3.5±0.2 mm at 100 mm Approx. Ф9±0.5 mm at 250 mm Approx. Ф18±1 mm at 500 mm |
|
Response time | 200us / 1ms / 10ms / 100 ms / 500 ms switching type | ||
Light source | White LED | ||
Reduction of mutual interference frequency |
Setting of different frequencies, max. 2 units*¹ | ||
Timer | OFF / turn-on delay / turn-off delay / single time | ||
Power voltage | 12-30VDC±10% | ||
Current consumption |
Less than 65 mA at 24V (without load) Less than 120 mA at 12V (without load) |
||
Control output*² |
NPN open collector/PNP open collector Switching type 30 V or less, 50 mA or less Residual voltage 2 V or less N.O./N.C. switching type |
||
External input*² | Tuning/stopping Switching type | ||
Protection circuits |
Power reverse connection protection, power surge protection, output overcurrent protection, output surge protection, output reverse connection protection |
||
Enclosure protection class | IP65/IP67 (IEC60529) | ||
Ambient light | Incandescent:below 10000Ix Sunlight:below 20000lx | ||
Ambient temperature | -20 to +50°C (no freezing) | ||
Relative humidity | 35 to 85% RH (no condensation) | ||
Shock resistance | 1,000 m/s² 6 times in each direction X, Y, Z | ||
Vibration resistance | 10 to 55 Hz Dual amplitude 1.5 mm 2 hours in each direction X, Y, Z | ||
Cable length (mm) | 2000 (Highly flexible drag chain type) | ||
Material | Zinc alloy | ||
Weight | Approx. 170 g |
NPN/PNP output
Model | LA2-WS300 | LA2-W500 | |
Type | Cable type | ||
Output type | NPN/PNP | ||
Detecting distance | 30~300mm | 30~500mm | |
Minimum spot diameter |
Variable spot Approx. Ф2±0.2 mm at 90 mm Approx. Ф5±0.5 mm at 200 mm Approx. Ф7±0.8 mm at 300 mm |
Variable spot Approx. Ф3.5±0.2 mm at 100 mm Approx. Ф9±0.5 mm at 250 mm Approx. Ф18±1 mm at 500 mm |
|
Response time | 200us / 1ms / 10ms / 100 ms / 500 ms switching type | ||
Light source | White LED | ||
Reduction of mutual interference frequency |
Setting of different frequencies, max. 2 units*¹ | ||
Timer | OFF / turn-on delay / turn-off delay / single time | ||
Power voltage | 12-30VDC±10% | ||
Current consumption |
Less than 65 mA at 24V (without load) Less than 120 mA at 12V (without load) |
||
Control output*² |
NPN open collector/PNP open collector Switching type 30 V or less, 50 mA or less Residual voltage 2 V or less N.O./N.C. switching type |
||
External input*² | Tuning/stopping Switching type | ||
Protection circuits |
Power reverse connection protection, power surge protection, output overcurrent protection, output surge protection, output reverse connection protection |
||
Enclosure protection class | IP65/IP67 (IEC60529) | ||
Ambient light | Incandescent:below 10000Ix Sunlight:below 20000lx | ||
Ambient temperature | -20 to +50°C (no freezing) | ||
Relative humidity | 35 to 85% RH (no condensation) | ||
Shock resistance | 1,000 m/s² 6 times in each direction X, Y, Z | ||
Vibration resistance | 10 to 55 Hz Dual amplitude 1.5 mm 2 hours in each direction X, Y, Z | ||
Cable length (mm) | 2000 (Highly flexible drag chain type) | ||
Material | Zinc alloy | ||
Weight | Approx. 170 g |
NPN output
Model | LA2-WS300CAN | LA2-W500CAN | |
Type | Relay type | ||
Output type | NPN | ||
Detecting distance | 30~300mm | 30~500mm | |
Minimum spot diameter |
Variable spot Approx. Ф2±0.2 mm at 90 mm Approx. Ф5±0.5 mm at 200 mm Approx. Ф7±0.8 mm at 300 mm |
Variable spot Approx. Ф3.5±0.2 mm at 100 mm Approx. Ф9±0.5 mm at 250 mm Approx. Ф18±1 mm at 500 mm |
|
Response time | 200us / 1ms / 10ms / 100 ms / 500 ms switching type | ||
Light source | White LED | ||
Reduction of mutual interference frequency |
Setting of different frequencies, max. 2 units*¹ | ||
Timer | OFF / turn-on delay / turn-off delay / single time | ||
Power voltage | 12-30VDC±10% | ||
Current consumption |
Less than 65 mA at 24V (without load) Less than 120 mA at 12V (without load) |
||
Control output*² |
NPN open collector/PNP open collector Switching type 30 V or less, 50 mA or less Residual voltage 2 V or less N.O./N.C. switching type |
||
External input*² | Tuning/stopping Switching type | ||
Protection circuits |
Power reverse connection protection, power surge protection, output overcurrent protection, output surge protection, output reverse connection protection |
||
Enclosure protection class | IP65/IP67 (IEC60529) | ||
Ambient light | Incandescent:below 10000Ix Sunlight:below 20000lx | ||
Ambient temperature | -20 to +50°C (no freezing) | ||
Relative humidity | 35 to 85% RH (no condensation) | ||
Shock resistance | 1,000 m/s² 6 times in each direction X, Y, Z | ||
Vibration resistance | 10 to 55 Hz Dual amplitude 1.5 mm 2 hours in each direction X, Y, Z | ||
Cable length (mm) | 160 (plug-in M8) | ||
Material | Zinc alloy | ||
Weight | Approx. 170 g |
PNP output
Model | LA2-WS300CAP | LA2-W500CAP | |
Type | Relay type | ||
Output type | PNP | ||
Detecting distance | 30~300mm | 30~500mm | |
Minimum spot diameter |
Variable spot Approx. Ф2±0.2 mm at 90 mm Approx. Ф5±0.5 mm at 200 mm Approx. Ф7±0.8 mm at 300 mm |
Variable spot Approx. Ф3.5±0.2 mm at 100 mm Approx. Ф9±0.5 mm at 250 mm Approx. Ф18±1 mm at 500 mm |
|
Response time | 200us / 1ms / 10ms / 100 ms / 500 ms switching type | ||
Light source | White LED | ||
Reduction of mutual interference frequency |
Setting of different frequencies, max. 2 units*¹ | ||
Timer | OFF / turn-on delay / turn-off delay / single time | ||
Power voltage | 12-30VDC±10% | ||
Current consumption |
Less than 65 mA at 24V (without load) Less than 120 mA at 12V (without load) |
||
Control output*² |
NPN open collector/PNP open collector Switching type 30 V or less, 50 mA or less Residual voltage 2 V or less N.O./N.C. switching type |
||
External input*² | Tuning/stopping Switching type | ||
Protection circuits |
Power reverse connection protection, power surge protection, output overcurrent protection, output surge protection, output reverse connection protection |
||
Enclosure protection class | IP65/IP67 (IEC60529) | ||
Ambient light | Incandescent:below 10000Ix Sunlight:below 20000lx | ||
Ambient temperature | -20 to +50°C (no freezing) | ||
Relative humidity | 35 to 85% RH (no condensation) | ||
Shock resistance | 1,000 m/s² 6 times in each direction X, Y, Z | ||
Vibration resistance | 10 to 55 Hz Dual amplitude 1.5 mm 2 hours in each direction X, Y, Z | ||
Cable length (mm) | 160 (plug-in M8) | ||
Material | Zinc alloy | ||
Weight | Approx. 170 g |
Model | LA2-WS300CA | LA2-W500CA | |
Type | Relay type | ||
Output type | NPN/PNP | ||
Detecting distance | 30~300mm | 30~500mm | |
Minimum spot diameter |
Variable spot Approx. Ф2±0.2 mm at 90 mm Approx. Ф5±0.5 mm at 200 mm Approx. Ф7±0.8 mm at 300 mm |
Variable spot Approx. Ф3.5±0.2 mm at 100 mm Approx. Ф9±0.5 mm at 250 mm Approx. Ф18±1 mm at 500 mm |
|
Response time | 200us / 1ms / 10ms / 100 ms / 500 ms switching type | ||
Light source | White LED | ||
Reduction of mutual interference frequency |
Setting of different frequencies, max. 2 units*¹ | ||
Timer | OFF / turn-on delay / turn-off delay / single time | ||
Power voltage | 12-30VDC±10% | ||
Current consumption |
Less than 65 mA at 24V (without load) Less than 120 mA at 12V (without load) |
||
Control output*² |
NPN open collector/PNP open collector Switching type 30 V or less, 50 mA or less Residual voltage 2 V or less N.O./N.C. switching type |
||
External input*² | Tuning/stopping Switching type | ||
Protection circuits |
Power reverse connection protection, power surge protection, output overcurrent protection, output surge protection, output reverse connection protection |
||
Enclosure protection class | IP65/IP67 (IEC60529) | ||
Ambient light | Incandescent:below 10000Ix Sunlight:below 20000lx | ||
Ambient temperature | -20 to +50°C (no freezing) | ||
Relative humidity | 35 to 85% RH (no condensation) | ||
Shock resistance | 1,000 m/s² 6 times in each direction X, Y, Z | ||
Vibration resistance | 10 to 55 Hz Dual amplitude 1.5 mm 2 hours in each direction X, Y, Z | ||
Cable length (mm) | 160 (plug-in M8) | ||
Material | Zinc alloy | ||
Weight | Approx. 170 g |
Quick Helpline