Register

Home > Products > Inductive Proximity Sensors > Cylindrical Type > High Performance Type > DH / DH2 Series > Specs

Inductive Proximity Sensors

High Performance Type- DH / DH2 Series

Overview Products Lineup Specs Dimensions Model Download
Technical Specs

DH series 3-wire standard type

Main model DH-004 DH-M005 DH-M008 DH-M012 DH-M018 DH-M030 DH-U008 DH-U012 DH-U018 DH-U030
Type Shielded Non-shielded
Detecting distance 1.2mm±10% 2mm±10% 4mm±10% 8mm±10% 15mm±10% 4mm±10% 8mm±10% 16mm±10% 30mm±10%
Setting distance 0~0.84mm 0~1.6mm 0~3.2mm 0~6.4mm 0~12mm 0~3.2mm 0~6.4mm 0~12.8mm 0~24mm
Standard target 5×5×1(mm) 8×8×1(mm) 12×12×1(mm) 24×24×1(mm) 45×45×1(mm) 12×12×1(mm) 24×24×1(mm) 48×48×1(mm) 90×90×1(mm)
Response frequency 2KHz 1.5KHz 1KHz 0.5KHz 0.25KHz 1KHz 0.8KHz 0.4KHz 0.1KHz
Hysteresis 1%~10% of detecting distance 1%~15% of detecting distance 1%~15% of detecting distance
Repeat precision Less than 3% of detecting distance Less than 5% of detecting distance Less than 5% of detecting distance
Power voltage 12~24VDC 10~30VDC 10~30VDC
Current consumption ＜10mA ＜10mA ＜15mA ＜22mA ＜10mA ＜15mA ＜22mA
Output - NPN output
NPN open collector transistor
Load current: ＜100mA
Residual voltage: ＜2V (Load current 100mA and cable 2 m)
＜200mA
2.5V or less（Load current 200mA and cable 2 m） 		NPN output
NPN open collector transistor
Load current: ＜100mA
Residual voltage: ＜2V (Load current 100mA and cable 2 m)
＜200mA
2.5V or less（Load current 200mA and cable 2 m）
Indicator Yellow indicator (Lights up when output is ON)
Protection circuit Reverse polarity protection, Output short-circuit protection, Surge absorber
Ambient temperature Using:-25℃~+70℃; Storage:-25℃~+70℃
Relative humidity Using:35~95%; Storage:35~95%
Withstand voltage 500VAC, 50/60Hz 1min between the whole charging part and the enclosure 1000VAC, 50/60Hz  1min between the whole charging part and the enclosure 1000VAC,50/60Hz  1min between the whole charging part and the enclosure
Insulation resistance >20MΩ (DC500V) between the whole charging part and the enclosure >50MΩ (DC500V) between the whole charging part and the enclosure >50MΩ (DC500V) between the whole charging part and the enclosure
Vibration resistance 10 to 55 Hz, double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500m/s² (Approx. 50G), 3 times in each of the X, Y, and Z directions
Protective structure IEC IP67
Connection method Standard wire length 2m
Material Enclosure: Nickel-plated brass, Front end: PBT, Back end: PC
Weight - Approx. 50g Approx. 95g Approx. 115g Approx. 190g Approx. 50g Approx. 95g Approx. 115g Approx. 190g

Technical Specs(PDF) Back to top

DH-E series 3-wire connector type

Main model DH-EM008 DH-EM012 DH-EM018 DH-EM030 DH-EU008 DH-EU012 DH-EU018 DH-EU030
Type Shielded Non-shielded
Detecting distance 2mm±10% 4mm±10% 8mm±10% 15mm±10% 4mm±10% 8mm±10% 16mm±10% 30mm±10%
Setting distance 0~1.6mm 0~3.2mm 0~6.4mm 0~12mm 0~3.2mm 0~6.4mm 0~12.8mm 0~24mm
Standard target 8×8×1(mm) 12×12×1(mm) 24×24×1(mm) 45×45×1(mm) 12×12×1(mm) 24×24×1(mm) 48×48×1(mm) 90×90×1(mm)
Response frequency 1.5KHz 1KHz 0.5KHz 0.25KHz 1KHz 0.8KHz 0.4KHz 0.1KHz
Hysteresis 1%~15% of detecting distance
Repeat precision Less than 5% of detection distance
Power voltage 10~30VDC
Current consumption ＜10mA ＜15mA ＜22mA ＜10mA ＜15mA ＜22mA
Output NPN output
NPN open collector transistor
Load current: ＜100mA
Residual voltage: ＜2V (Load current 100mA and cable 2 m)
＜200mA
2.5V or less（Load current 200mA and cable 2 m）
Indicator Yellow indicator (Lights up when output is ON)
Protection circuit Reverse polarity protection, Output short-circuit protection, Surge absorber
Ambient temperature Using:-25℃~+70℃; Storage:-25℃~+70℃
Relative humidity Using:35~95%; Storage:35~95%
Withstand voltage 1000V AC, 50/60Hz 1min between the whole charging part and the enclosure
Insulation resistance >50MΩ (DC500V) between the whole charging part and the enclosure
Vibration resistance 10 to 55 Hz, double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500m/s² (Approx. 50G), 3 times in each of the X, Y, and Z directions
Protective structure IEC IP67
Connection method

Connector

rM8-3Pin

Connector M12-4Pin

Connector

M8-3Pin

Connector M12-4Pin
Material Enclosure: Nickel-plated brass (Except SN08 housing is stainless steel), Front end: PBT, Back end: PC
Weight Approx. 20g Approx. 30g Approx. 60g Approx. 130g Approx. 20g Approx. 30g Approx. 60g Approx. 130g

Technical Specs(PDF) Back to top

DH-C series 3-wire relay type

Main model DH-CM008 DH-CM012 DH-CM018 DH-CM030 DH-CU008 DH-CU012 DH-CU018 DH-CU030
Type Shielded Non-shielded
Detecting distance 2mm±10% 4mm±10% 8mm±10% 15mm±10% 4mm±10% 8mm±10% 16mm±10% 30mm±10%
Setting distance 0~1.2mm 0~1.6m 0~4mm 0~8mm 0~1.6mm 0~3.2mm 0~6.4mm 0~12mm
Standard target 8×8×1(mm) 12×12×1(mm) 18×18×1(mm) 30×30×1(mm) 8×8×1(mm) 12×12×1(mm) 24×24×1(mm) 45×45×1(mm)
Response frequency 2KHz 1.5KHz 1KHz 0.5KHz 1KHz 0.8KHz 0.4KHz 0.1KHz
Hysteresis 1%~15% of detecting distance
Repeat precision Less than 5% of detection distance
Power voltage 10~30VDC
Output NO/NC
Load current ＜100mA
Residual voltage ＜5V
Indicator Yellow indicator (Lights up when output is ON)
Protection circuit Reverse polarity protection, Output short-circuit protection, Surge absorber
Ambient temperature Using:-25℃~+70℃; Storage:-25℃~+70℃
Relative humidity Using:35~95%; Storage:35~95%
Withstand voltage 1000V AC, 50/60Hz 1min between the whole charging part and the enclosure
Insulation resistance >50MΩ (DC500V) between the whole charging part and the enclosure
Vibration resistance 10 to 55 Hz, double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500m/s² (Approx. 50G), 3 times in each of the X, Y, and Z directions
Protective structure IEC IP67
Connection method

Connector

M8-3Pin

Connector M12-4Pin

Connector

M8-3Pin

Connector M12-4Pin
Material Enclosure: Nickel-plated brass, Front end: PBT, Back end: PC
Weight Approx. 20g Approx. 30g Approx. 60g Approx. 130g Approx. 20g Approx. 30g Approx. 60g Approx. 130g

Technical Specs(PDF) Back to top

DH2 series 2-wire standard type

Main model DH2-M008 DH2-M012 DH2-M018 DH2-M030 DH2-U008 DH2-U012 DH2-U018 DH2-U030
Type Shielded Non-shielded
Detecting distance 2mm±10% 4mm±10% 8mm±10% 15mm±10% 4mm±10% 8mm±10% 16mm±10% 30mm±10%
Setting distance 0~1.2mm 0~1.6m 0~4mm 0~8mm 0~1.6mm 0~3.2mm 0~6.4mm 0~12mm
Standard target 8×8×1(mm) 12×12×1(mm) 18×18×1(mm) 30×30×1(mm) 8×8×1(mm) 12×12×1(mm) 24×24×1(mm) 45×45×1(mm)
Response frequency 2KHz 1.5KHz 1KHz 0.5KHz 1KHz 0.8KHz 0.4KHz 0.1KHz
Hysteresis 1%~15% of detecting distance
Repeat precision Less than 5% of detecting distance
Power voltage 10~30VDC
Output NO/NC
Load current ＜100mA
Residual voltage ＜5V
Indicator Yellow indicator (Lights up when output is ON)
Protection circuit Reverse polarity protection, Output short-circuit protection, Surge absorber
Ambient temperature Using:-25℃~+70℃; Storage:-25℃~+70℃
Relative humidity Using:35~95%; Storage:35~95%
Withstand voltage 1000V AC、50/60Hz 1min between the whole charging part and the enclosure
Insulation resistance >50MΩ (DC500V) between the whole charging part and the enclosure
Vibration resistance 10 to 55 Hz, double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500m/s² (Approx. 50G), 3 times in each of the X, Y, and Z directions
Protective structure IEC IP67
Connection method Standard wire length 2m
Material Housing: Nickel-plated brass, Front end: PBT, Back end: PC
Weight Approx. 20g Approx. 30g Approx. 60g Approx. 130g Approx. 20g Approx. 30g Approx. 60g Approx. 130g

Technical Specs(PDF) Back to top

DH2-E series 2-wire connector type

Main model DH2-EM008 DH2-EM012 DH2-EM018 DH2-EM030 DH2-EU008 DH2-EU012 DH2-EU018 DH2-EU030
Type Shielded Non-shielded
Detecting distance 2mm±10% 4mm±10% 8mm±10% 15mm±10% 4mm±10% 8mm±10% 16mm±10% 30mm±10%
Setting distance 0~1.2mm 0~1.6m 0~4mm 0~8mm 0~1.6mm 0~3.2mm 0~6.4mm 0~12mm
Standard target 8×8×1(mm) 12×12×1(mm) 18×18×1(mm) 30×30×1(mm) 8×8×1(mm) 12×12×1(mm) 24×24×1(mm) 45×45×1(mm)
Response frequency 2KHz 1.5KHz 1KHz 0.5KHz 1KHz 0.8KHz 0.4KHz 0.1KHz
Hysteresis 1%~15% of detecting distance
Repeat precision Less than 5% of detecting distance
Power voltage 10~30VDC
Output NO/NC
Load current ＜100mA
Residual voltage ＜5V
Indicator Yellow indicator (Lights up when output is ON)
Protection circuit Reverse polarity protection, Output short-circuit protection, Surge absorber
Ambient temperature Using:-25℃~+70℃; Storage:-25℃~+70℃
Relative humidity Using:35~95%; Storage:35~95%
Withstand voltage 1000V AC, 50/60Hz 1min between the whole charging part and the enclosure
Insulation resistance >50MΩ (DC500V) between the whole charging part and the enclosure
Vibration resistance 10 to 55 Hz, double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500m/s² (Approx. 50G), 3 times in each of the X, Y, and Z directions
Protective structure IEC IP67
Connection method Connector
M8-3Pin 		Connector M12-4Pin Connector
M8-3Pin 		Connector M12-4Pin
Material Enclosure: Nickel-plated brass, Front end: PBT, Back end: PC
Weight Approx. 20g Approx. 30g Approx. 60g Approx. 130g Approx. 20g Approx. 30g Approx. 60g Approx. 130g

Technical Specs(PDF) Back to top

DH2-C series 2-wire relay type

Main model DH2-CM008 DH2-CM012 DH2-CM018 DH2-CM030 DH2-CU008 DH2-CU012 DH2-CU018 DH2-CU030
Type Shielded Non-shielded
Detecting distance 2mm±10% 4mm±10% 8mm±10% 15mm±10% 4mm±10% 8mm±10% 16mm±10% 30mm±10%
Setting distance 0~1.2mm 0~1.6m 0~4mm 0~8mm 0~1.6mm 0~3.2mm 0~6.4mm 0~12mm
Standard target 8×8×1(mm) 12×12×1(mm) 18×18×1(mm) 30×30×1(mm) 8×8×1(mm) 12×12×1(mm) 24×24×1(mm) 45×45×1(mm)
Response frequency 2KHz 1.5KHz 1KHz 0.5KHz 1KHz 0.8KHz 0.4KHz 0.1KHz
Hysteresis 1%~15% of detecting distance
Repeat precision Less than 5% of detecting distance
Power voltage 10~30VDC
Output NO/NC
Load current ＜100mA
Residual voltage ＜5V
Indicator Yellow indicator (Lights up when output is ON)
Protection circuit Reverse polarity protection, Output short-circuit protection, Surge absorber
Ambient temperature Using:-25℃~+70℃; Storage:-25℃~+70℃
Relative humidity Using:35~95%; Storage:35~95%
Withstand voltage 1000V AC, 50/60Hz 1min between the whole charging part and the enclosure
Insulation resistance >50MΩ (DC500V) between the whole charging part and the enclosure
Vibration resistance 10 to 55 Hz, double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500m/s² (Approx. 50G), 3 times in each of the X, Y, and Z directions
Protective structure IEC IP67
Connection method Connector
M8-3Pin 		Connector M12-4Pin Connector
M8-3Pin 		Connector M12-4Pin
Cable length 0.3m
Material Housing: Nickel-plated brass, Front end: PBT, Back end: PC
Weight Approx. 20g Approx. 30g Approx. 60g Approx. 130g Approx. 20g Approx. 30g Approx. 60g Approx. 130g

Technical Specs(PDF) Back to top
DH / DH2 SeriesOverview

Download

Service

Overview Products Lineup Specs Dimensions Model Download

Recommended Series

You may also be interested in the following informationView more>>

Download

Service Support

Quick Helpline

Recommended Content

Home > Products > Inductive Proximity Sensors > Cylindrical Type > High Performance Type

Inductive Proximity Sensors series

High Performance Type Inductive Proximity Sensor
DH / DH2 Series
General Standard Type Cylindrical Inductive Proximity Sensor
DL Series
Square Ultra-small Type Inductive Proximity Sensor
DT-Q Series

Inductive Proximity Sensors

View more >

Copyright © 2021 Shenzhen SENPUM Electric Co., Ltd. All Rights Reserved

Room 2905, Building A, Yangguang Kechuang Center, Nanxin Road, Nanshan District, Shenzhen, Guangdong, China

GD ICP No. 16120534-2 GD GongAn Beian No. 44030502001756
  • +86-755-83330055
  • info@senpum.com
×

Login

Forgot your password/Username?Register