| Model | DH2-EU030-L30 |
| Type | Non-shielded |
| Normally open | |
| Detecting distance | 30mm±10% |
| Setting distance | 0~12mm |
| Standard target | 45×45×1(mm) |
| Response frequency | 0.1KHz |
| Hysteresis | 1%~15% of detecting distance |
| Repeat precision | Less than 5% of detecting distance |
| Power voltage | 10~30VDC |
| Output | NO/NC |
| Load current | ＜100mA |
| Residual voltage | ＜5V |
| Indicator | Yellow indicator (Lights up when output is ON) |
| Protection circuit | Reverse polarity protection, Output short-circuit protection, Surge absorber |
| Ambient temperature | Using:-25℃~+70℃; Storage:-25℃~+70℃ |
| Relative humidity | Using:35~95%; Storage:35~95% |
| Withstand voltage | 1000V AC, 50/60Hz 1min between the whole charging part and the enclosure |
| Insulation resistance | >50MΩ (DC500V) between the whole charging part and the enclosure |
| Vibration resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions |
| Shock resistance | 500m/s² (Approx. 50G), 3 times in each of the X, Y, and Z directions |
| Protective structure | IEC IP67 |
| Connection method | Connector M12-4Pin |
| Material | Enclosure: Nickel-plated brass, Front end: PBT, Back end: PC |
| Weight | Approx. 130g |
Quick Helpline
Copyright © 2021 Shenzhen SENPUM Electric Co., Ltd. All Rights Reserved
Room 2905, Building A, Yangguang Kechuang Center, Nanxin Road, Nanshan District, Shenzhen, Guangdong, China
Download Catalogue
Technical Specifications
Download
GD ICP No. 16120534-2
GD GongAn Beian No. 44030502001756
Delete all items