NPN output
| Model | LA2-ZB100N | LA2-ZB150N | LA2-ZB250N | LA2-ZB300N | LA2-ZB500N | LA2-ZB600N | |
| Type | Standard | ||||||
| Output type | NPN | ||||||
| Actual detecting distance (mm) | 25~100 | 25~150 | 25~250 | 25~300 | 25~500 | 25~600 | |
| Spot size | Approx. 1*2mm at 100mm | Approx. 1*2mm at 100mm | Approx. Ф2mm at 500mm | ||||
|
Standardized test segment differences |
25-50mm: 1.2mm | 25-60mm: 4.5mm | 25-60mm: 4.5mm | ||||
| 50-80mm: 1.8mm | 60-100mm: 6mm | 60-100mm: 6mm 100-200mm: 12mm | |||||
| 80-110mm: 2.4mm | 100-200mm: 12mm | 200-300mm: 24mm 300-380mm: 30mm | |||||
| 110-150mm: 3.6mm | 200-300mm: 24mm | 380-500mm: 48mm 500-600mm: 90mm | |||||
| Display resolution | 25-50mm: 0.1mm | 25-100mm: 0.5mm | 25-100mm: 0.5mm 100-200mm: 1mm | ||||
| 50-110mm: 0.2mm | 100-200mm: 1mm | 200-300mm: 2mm 300-380mm: 2.5mm | |||||
| 110-150mm: 0.4mm | 200-300mm: 2mm | 380-500mm: 4mm 500-600mm: 5mm | |||||
| Light source | Category | Red laser (650nm) | |||||
| Laser classification | Class 2 laser products | ||||||
| Function | Indicator light | 4-digit 7-segment display (white), output indicator (red), RNG indicator (green), 1spot indicator (green) | |||||
| Timer | OFF/ON delay/ OFF delay/single trigger | ||||||
| Power voltage | 12 to 30VDC including 10% fluctuation (p-p) | ||||||
| Power consumption | 550mW or less (22mA or less at 24V, 42mA or less at 12V) | ||||||
| Response time | 2ms/10ms/50ms | ||||||
| Control output |
LA2-ZB*N: NPN open collector / LA2-ZB*P: PNP open collector Applied voltage less than 30VDC, control current less than 100mA Residual voltage: 2V or less at 100mA |
||||||
| Protection circuit | Power reverse connection protection, power surge protection, output overcurrent protection, output reverse connection protection | ||||||
| Output type | LIGHT-ON/DARK-ON | ||||||
| External input |
Input time Tuning: ON when 35ms or more, OFF when 35ms or more Light throw stop: ON for more than 2ms, OFF for more than 20ms Short-circuit current NPN: 1mA or less / PNP: 2mA or less |
||||||
| Enclosure protection class | IP67 | ||||||
| Ambient luminosity | Incandescent: below 5000lux Daylight: below 10000lux | ||||||
| Ambient temperature | In use: -10 to +50°C (no icing) In storage: -25 to +75°C (no icing) | ||||||
| Relative humidity | 35 to 85%RH (no condensation) | ||||||
| Impact resistance | 1000m/s² 6 times each in X, Y, and Z directions | ||||||
| Vibration resistance | 10 to 55Hz, double amplitude 1.5mm, two hours each in X, Y, and Z directions | ||||||
| Insulation resistance | 20MΩ or more (500VDC) | ||||||
| Voltage resistance | AC500V 50/60Hz 1min | ||||||
| Material | Housing: Zinc alloy Indicator cover: PC Lens cap: PMMA Button: ABSA Cable: PVC | ||||||
| Weight | Approx. 90g (cable included) | ||||||
PNP output
| Model | LA2-ZB100P | LA2-ZB150P | LA2-ZB250P | LA2-ZB300P | LA2-ZB500P | LA2-ZB600P | |
| Type | Standard | ||||||
| Output type | PNP | ||||||
| Actual detecting distance (mm) | 25~100 | 25~150 | 25~250 | 25~300 | 25~500 | 25~600 | |
| Spot size | Approx. 1*2mm at 100mm | Approx. 1*2mm at 100mm | Approx. Ф2mm at 500mm | ||||
|
Standardized test segment differences |
25-50mm: 1.2mm | 25-60mm: 4.5mm | 25-60mm:4.5mm | ||||
| 50-80mm: 1.8mm | 60-100mm: 6mm | 60-100mm: 6mm 100-200mm: 12mm | |||||
| 80-110mm: 2.4mm | 100-200mm: 12mm | 200-300mm: 24mm 300-380mm: 30mm | |||||
| 110-150mm: 3.6mm | 200-300mm: 24mm | 380-500mm: 48mm 500-600mm: 90mm | |||||
| Display resolution | 25-50mm: 0.1mm | 25-100mm: 0.5mm | 25-100mm: 0.5mm 100-200mm: 1mm | ||||
| 50-110mm: 0.2mm | 100-200mm: 1mm | 200-300mm: 2mm 300-380mm: 2.5mm | |||||
| 110-150mm: 0.4mm | 200-300mm: 2mm | 380-500mm: 4mm 500-600mm: 5mm | |||||
| Light source | Category | Red laser (650nm) | |||||
| Laser classification | Class 2 laser products | ||||||
| Function | Indicator light | 4-digit 7-segment display (white), output indicator (red), RNG indicator (green), 1spot indicator (green) | |||||
| Timer | OFF/ON delay/ OFF delay/single trigger | ||||||
| Power voltage | 12 to 30VDC including 10% fluctuation (p-p) | ||||||
| Power consumption | 550mW or less (22mA or less at 24V, 42mA or less at 12V) | ||||||
| Response time | 2ms/10ms/50ms | ||||||
| Control output |
LA2-ZB*N: NPN open collector / LA2-ZB*P: PNP open collector Applied voltage less than 30VDC, control current less than 100mA Residual voltage: 2V or less at 100mA |
||||||
| Protection circuit | Power reverse connection protection, power surge protection, output overcurrent protection, output reverse connection protection | ||||||
| Output type | LIGHT-ON/DARK-ON | ||||||
| External input |
Input time Tuning: ON when 35ms or more, OFF when 35ms or more Light throw stop: ON for more than 2ms, OFF for more than 20ms Short-circuit current NPN: 1mA or less / PNP: 2mA or less |
||||||
| Enclosure protection class | IP67 | ||||||
| Ambient luminosity | Incandescent: below 5000lux Daylight: below 10000lux | ||||||
| Ambient temperature | In use: -10 to +50°C (no icing) In storage: -25 to +75°C (no icing) | ||||||
| Relative humidity | 35 to 85%RH (no condensation) | ||||||
| Impact resistance | 1000m/s² 6 times each in X, Y, and Z directions | ||||||
| Vibration resistance | 10 to 55Hz, double amplitude 1.5mm, two hours each in X, Y, and Z directions | ||||||
| Insulation resistance | 20MΩ or more (500VDC) | ||||||
| Voltage resistance | AC500V 50/60Hz 1min | ||||||
| Material | Housing: Zinc alloy Indicator cover: PC Lens cap: PMMA Button: ABSA Cable: PVC | ||||||
| Weight | Approx. 90g (cable included) | ||||||
| Model | LA2-ZB100P | LA2-ZB150P | LA2-ZB250P | LA2-ZB300P | LA2-ZB500P | LA2-ZB600P | |
| Type | Standard | ||||||
| Output type | PNP | ||||||
| Actual detecting distance (mm) | 25~100 | 25~150 | 25~250 | 25~300 | 25~500 | 25~600 | |
| Spot size | Approx. 1*2mm at 100mm | Approx. 1*2mm at 100mm | Approx. Ф2mm at 500mm | ||||
|
Standardized test segment differences |
25-50mm: 1.2mm | 25-60mm: 4.5mm | 25-60mm:4.5mm | ||||
| 50-80mm: 1.8mm | 60-100mm: 6mm |
60-100mm: 6mm 100-200mm: 12mm |
|||||
| 80-110mm: 2.4mm | 100-200mm: 12mm |
200-300mm: 24mm 300-380mm: 30mm |
|||||
| 110-150mm: 3.6mm | 200-300mm: 24mm |
380-500mm: 48mm 500-600mm: 90mm |
|||||
| Display resolution | 25-50mm: 0.1mm | 25-100mm: 0.5mm |
25-100mm: 0.5mm 100-200mm: 1mm |
||||
| 50-110mm: 0.2mm | 100-200mm: 1mm |
200-300mm: 2mm 300-380mm: 2.5mm |
|||||
| 110-150mm: 0.4mm | 200-300mm: 2mm |
380-500mm: 4mm 500-600mm: 5mm |
|||||
| Light source | Category | Red laser (650nm) | |||||
| Laser classification | Class 2 laser products | ||||||
| Function | Indicator light | 4-digit 7-segment display (white), output indicator (red), RNG indicator (green), 1spot indicator (green) | |||||
| Timer | OFF/ON delay/ OFF delay/single trigger | ||||||
| Power voltage | 12 to 30VDC including 10% fluctuation (p-p) | ||||||
| Power consumption | 550mW or less (22mA or less at 24V, 42mA or less at 12V) | ||||||
| Response time | 2ms/10ms/50ms | ||||||
| Control output |
LA2-ZB*N: NPN open collector / LA2-ZB*P: PNP open collector Applied voltage less than 30VDC, control current less than 100mA Residual voltage: 2V or less at 100mA |
||||||
| Protection circuit | Power reverse connection protection, power surge protection, output overcurrent protection, output reverse connection protection | ||||||
| Output type | LIGHT-ON/DARK-ON | ||||||
| External input |
Input time Tuning: ON when 35ms or more, OFF when 35ms or more Light throw stop: ON for more than 2ms, OFF for more than 20ms Short-circuit current NPN: 1mA or less / PNP: 2mA or less |
||||||
| Enclosure protection class | IP67 | ||||||
| Ambient luminosity | Incandescent: below 5000lux Daylight: below 10000lux | ||||||
| Ambient temperature | In use: -10 to +50°C (no icing) In storage: -25 to +75°C (no icing) | ||||||
| Relative humidity | 35 to 85%RH (no condensation) | ||||||
| Impact resistance | 1000m/s² 6 times each in X, Y, and Z directions | ||||||
| Vibration resistance | 10 to 55Hz, double amplitude 1.5mm, two hours each in X, Y, and Z directions | ||||||
| Insulation resistance | 20MΩ or more (500VDC) | ||||||
| Voltage resistance | AC500V 50/60Hz 1min | ||||||
| Material | Housing: Zinc alloy Indicator cover: PC Lens cap: PMMA Button: ABSA Cable: PVC | ||||||
| Weight | Approx. 90g (cable included) | ||||||
Note: When the measurement conditions are not specified, the conditions of use are as follows: supply voltage: 24VDC; ambient temperature: 20℃; response time: 10ms; detection object: white cardboard
NPN output
| Model | LA2-ZB100CAN | LA2-ZB150CAN | LA2-ZB250CAN | LA2-ZB300CAN | LA2-ZB500CAN | LA2-ZB600CAN | |
| Type | Relay | ||||||
| Output type | NPN | ||||||
| Actual detecting distance (mm) | 25~100 | 25~150 | 25~250 | 25~300 | 25~500 | 25~600 | |
| Spot size | Approx. 1*2mm at 100mm | Approx. 1*2mm at 100mm | Approx. Ф2mm at 500mm | ||||
|
Standardized test segment differences |
25-50mm: 1.2mm | 25-60mm: 4.5mm | 25-60mm: 4.5mm | ||||
| 50-80mm: 1.8mm | 60-100mm: 6mm |
60-100mm: 6mm 100-200mm: 12mm |
|||||
| 80-110mm: 2.4mm | 100-200mm: 12mm |
200-300mm: 24mm 300-380mm: 30mm |
|||||
| 110-150mm: 3.6mm | 200-300mm: 24mm |
380-500mm:48mm 500-600mm: 90mm |
|||||
| Display resolution | 25-50mm: 0.1mm | 25-100mm: 0.5mm |
25-100mm: 0.5mm 100-200mm: 1mm |
||||
| 50-110mm: 0.2mm | 100-200mm: 1mm |
200-300mm: 2mm 300-380mm: 2.5mm |
|||||
| 110-150mm: 0.4mm | 200-300mm: 2mm |
380-500mm: 4mm 500-600mm: 5mm |
|||||
| Light source | Category | Red laser (650nm) | |||||
| Laser classification | Class 2 laser products | ||||||
| Function | Indicator light | 4-digit 7-segment display (white), output indicator (red), RNG indicator (green), 1spot indicator (green) | |||||
| Timer | OFF/ON delay/ OFF delay/single trigger | ||||||
| Power voltage | 12 to 30VDC including 10% fluctuation (p-p) | ||||||
| Power consumption | 550mW or less (22mA or less at 24V, 42mA or less at 12V) | ||||||
| Response time | 2ms/10ms/50ms | ||||||
| Control output |
LA2-ZB*N: NPN open collector / LA2-ZB*P: PNP open collector Applied voltage less than 30VDC, control current less than 100mA Residual voltage: 2V or less at 100mA |
||||||
| Protection circuit | Power reverse connection protection, power surge protection, output overcurrent protection, output reverse connection protection | ||||||
| Output type | LIGHT-ON/DARK-ON | ||||||
| External input |
Input time Tuning: ON when 35ms or more, OFF when 35ms or more Light throw stop: ON for more than 2ms, OFF for more than 20ms Short-circuit current NPN: 1mA or less / PNP: 2mA or less |
||||||
| Enclosure protection class | IP67 | ||||||
| Ambient luminosity | Incandescent: below 5000lux Daylight: below 10000lux | ||||||
| Ambient temperature | In use: -10 to +50°C (no icing) In storage: -25 to +75°C (no icing) | ||||||
| Relative humidity | 35 to 85%RH (no condensation) | ||||||
| Impact resistance | 1000m/s² 6 times each in X, Y, and Z directions | ||||||
| Vibration resistance | 10 to 55Hz, double amplitude 1.5mm, two hours each in X, Y, and Z directions | ||||||
| Insulation resistance | 20MΩ or more (500VDC) | ||||||
| Voltage resistance | AC500V 50/60Hz 1min | ||||||
| Material | Housing: Zinc alloy Indicator cover: PC Lens cap: PMMA Button: ABSA Cable: PVC | ||||||
| Weight | Approx. 90g (cable included) | ||||||
Note: When the measurement conditions are not specified, the conditions of use are as follows: supply voltage: 24VDC; ambient temperature: 20℃; response time: 10ms; detection object: white cardboard
PNP output
| Model | LA2-ZB100CAP | LA2-ZB150CAP | LA2-ZB250CAP | LA2-ZB300CAP | LA2-ZB500CAP | LA2-ZB600CAP | |
| Type | Relay | ||||||
| Output type | PNP | ||||||
| Actual detecting distance (mm) | 25~100 | 25~150 | 25~250 | 25~300 | 25~500 | 25~600 | |
| Spot size | Approx. 1*2mm at 100mm | Approx. 1*2mm at 100mm | Approx. Ф2mm at 500mm | ||||
|
Standardized test segment differences |
25-50mm: 1.2mm | 25-60mm: 4.5mm | 25-60mm: 4.5mm | ||||
| 50-80mm: 1.8mm | 60-100mm: 6mm |
60-100mm: 6mm 100-200mm: 12mm |
|||||
| 80-110mm: 2.4mm | 100-200mm: 12mm |
200-300mm: 24mm 300-380mm: 30mm |
|||||
| 110-150mm: 3.6mm | 200-300mm: 24mm |
380-500mm: 48mm 500-600mm: 90mm |
|||||
| Display resolution | 25-50mm: 0.1mm | 25-100mm: 0.5mm |
25-100mm: 0.5mm 100-200mm: 1mm |
||||
| 50-110mm: 0.2mm | 100-200mm: 1mm |
200-300mm: 2mm 300-380mm: 2.5mm |
|||||
| 110-150mm: 0.4mm | 200-300mm: 2mm |
380-500mm: 4mm 500-600mm: 5mm |
|||||
| Light source | Category | Red laser (650nm) | |||||
| Laser classification | Class 2 laser products | ||||||
| Function | Indicator light | 4-digit 7-segment display (white), output indicator (red), RNG indicator (green), 1spot indicator (green) | |||||
| Timer | OFF/ON delay/ OFF delay/single trigger | ||||||
| Power voltage | 12 to 30VDC including 10% fluctuation (p-p) | ||||||
| Power consumption | 550mW or less (22mA or less at 24V, 42mA or less at 12V) | ||||||
| Response time | 2ms/10ms/50ms | ||||||
| Control output |
LA2-ZB*N: NPN open collector / LA2-ZB*P: PNP open collector Applied voltage less than 30VDC, control current less than 100mA Residual voltage: 2V or less at 100mA |
||||||
| Protection circuit | Power reverse connection protection, power surge protection, output overcurrent protection, output reverse connection protection | ||||||
| Output type | LIGHT-ON/DARK-ON | ||||||
| External input |
Input time Tuning: ON when 35ms or more, OFF when 35ms or more Light throw stop: ON for more than 2ms, OFF for more than 20ms Short-circuit current NPN: 1mA or less / PNP: 2mA or less |
||||||
| Enclosure protection class | IP67 | ||||||
| Ambient luminosity | Incandescent: below 5000lux Daylight: below 10000lux | ||||||
| Ambient temperature | In use: -10 to +50°C (no icing) In storage: -25 to +75°C (no icing) | ||||||
| Relative humidity | 35 to 85%RH (no condensation) | ||||||
| Impact resistance | 1000m/s² 6 times each in X, Y, and Z directions | ||||||
| Vibration resistance | 10 to 55Hz, double amplitude 1.5mm, two hours each in X, Y, and Z directions | ||||||
| Insulation resistance | 20MΩ or more (500VDC) | ||||||
| Voltage resistance | AC500V 50/60Hz 1min | ||||||
| Material | Housing: Zinc alloy Indicator cover: PC Lens cap: PMMA Button: ABSA Cable: PVC | ||||||
| Weight | Approx. 90g (cable included) | ||||||
Note: When the measurement conditions are not specified, the conditions of use are as follows: supply voltage: 24VDC; ambient temperature: 20℃; response time: 10ms; detection object: white cardboard
Quick Helpline
Copyright © 2021 Shenzhen SENPUM Electric Co., Ltd. All Rights Reserved
Room 2905, Building A, Yangguang Kechuang Center, Nanxin Road, Nanshan District, Shenzhen, Guangdong, China
Download
Technical Specs
GD ICP No. 16120534-2
GD GongAn Beian No. 44030502001756
Download
Delete all items