Home > Products > Laser Sensors > Background Suppression Type > CMOS Type > LA2-ZB Series > Model > LA2-ZB500N

Laser Sensors

CMOS TypeLA2-ZB Series

Standard type 25~500mm NPN

Other Models

LA2-ZB500N

Specifications

Model LA2-ZB500N
Type Standard
Output type NPN
Actual detecting distance (mm) 25~500
Spot size Approx. Ф2mm at 500mm
Standardized test
segment differences
25-60mm: 4.5mm

60-100mm: 6mm

100-200mm: 12mm

200-300mm: 24mm

300-380mm: 30mm

380-500mm: 48mm

500-600mm: 90mm

Display resolution

25-100mm: 0.5mm

100-200mm: 1mm

200-300mm: 2mm

300-380mm: 2.5mm

380-500mm: 4mm

500-600mm: 5mm

Light source Category Red laser (650nm)
Laser classification Class 2 laser products
Function Indicator light 4-digit 7-segment display (white), output indicator (red), RNG indicator (green), 1spot indicator (green)
Timer OFF/ON delay/ OFF delay/single trigger
Power voltage 12 to 30VDC including 10% fluctuation (p-p)
Power consumption 550mW or less (22mA or less at 24V, 42mA or less at 12V)
Response time 2ms/10ms/50ms
Control output LA2-ZB*N: NPN open collector / LA2-ZB*P: PNP open collector
Applied voltage less than 30VDC, control current less than 100mA
Residual voltage: 2V or less at 100mA
Protection circuit Power reverse connection protection, power surge protection, output overcurrent protection, output reverse connection protection
Output type LIGHT-ON/DARK-ON
External input Input time Tuning: ON when 35ms or more, OFF when 35ms or more
Light throw stop: ON for more than 2ms, OFF for more than 20ms
Short-circuit current NPN: 1mA or less / PNP: 2mA or less
Enclosure protection class IP67
Ambient luminosity Incandescent: below 5000lux Daylight: below 10000lux
Ambient temperature In use: -10 to +50°C (no icing) In storage: -25 to +75°C (no icing)
Relative humidity 35 to 85%RH (no condensation)
Impact resistance 1000m/s² 6 times each in X, Y, and Z directions
Vibration resistance 10 to 55Hz, double amplitude 1.5mm, two hours each in X, Y, and Z directions
Insulation resistance 20MΩ or more (500VDC)
Voltage resistance AC500V 50/60Hz 1min
Material Housing: Zinc alloy Indicator cover: PC Lens cap: PMMA Button: ABSA Cable: PVC
Weight Approx. 90g (cable included)
Note:  When the measurement conditions are not specified, the conditions of use are as follows:  supply voltage:  24VDC; ambient temperature:  20℃; response time:  10ms; detection object:  white cardboard

You may also be interested in the following informationView more>>


Recommended Content

Home > Products > Laser Sensors > Background Suppression Type > CMOS Type
×

Login

Forgot your password/Username?Register