Model | LA2-ZB600N | ||||||
Type | Standard | ||||||
Output type | NPN | ||||||
Actual detecting distance (mm) | 25~600 | ||||||
Spot size | Approx. Ф2mm at 500mm | ||||||
Standardized test segment differences | 25-60mm: 4.5mm | ||||||
60-100mm: 6mm 100-200mm: 12mm | |||||||
200-300mm: 24mm 300-380mm: 30mm | |||||||
380-500mm: 48mm 500-600mm: 90mm | |||||||
Display resolution | 25-100mm: 0.5mm 100-200mm: 1mm | ||||||
200-300mm: 2mm 300-380mm: 2.5mm | |||||||
380-500mm: 4mm 500-600mm: 5mm | |||||||
Light source | Category | Red laser (650nm) | |||||
Laser classification | Class 2 laser products | ||||||
Function | Indicator light | 4-digit 7-segment display (white), output indicator (red), RNG indicator (green), 1spot indicator (green) | |||||
Timer | OFF/ON delay/ OFF delay/single trigger | ||||||
Power voltage | 12 to 30VDC including 10% fluctuation (p-p) | ||||||
Power consumption | 550mW or less (22mA or less at 24V, 42mA or less at 12V) | ||||||
Response time | 2ms/10ms/50ms | ||||||
Control output | LA2-ZB*N: NPN open collector / LA2-ZB*P: PNP open collector Applied voltage less than 30VDC, control current less than 100mA Residual voltage: 2V or less at 100mA | ||||||
Protection circuit | Power reverse connection protection, power surge protection, output overcurrent protection, output reverse connection protection | ||||||
Output type | LIGHT-ON/DARK-ON | ||||||
External input | Input time Tuning: ON when 35ms or more, OFF when 35ms or more Light throw stop: ON for more than 2ms, OFF for more than 20ms Short-circuit current NPN: 1mA or less / PNP: 2mA or less | ||||||
Enclosure protection class | IP67 | ||||||
Ambient luminosity | Incandescent: below 5000lux Daylight: below 10000lux | ||||||
Ambient temperature | In use: -10 to +50°C (no icing) In storage: -25 to +75°C (no icing) | ||||||
Relative humidity | 35 to 85%RH (no condensation) | ||||||
Impact resistance | 1000m/s² 6 times each in X, Y, and Z directions | ||||||
Vibration resistance | 10 to 55Hz, double amplitude 1.5mm, two hours each in X, Y, and Z directions | ||||||
Insulation resistance | 20MΩ or more (500VDC) | ||||||
Voltage resistance | AC500V 50/60Hz 1min | ||||||
Material | Housing: Zinc alloy Indicator cover: PC Lens cap: PMMA Button: ABSA Cable: PVC | ||||||
Weight | Approx. 90g (cable included) |
Quick Helpline