| Model | LM-030 | LM-065 | LM-100 | LM-300 | LM-600 | |
| Datum distance (mm) | 30 | 65 | 100 | 300 | 600 | |
| Measuring distance (mm) | 20~45 | 55~105 | 75~130 | 160~450 | 200~1000 | |
| light source | kind | Red Laser (639nm) | ||||
| Laser Type | Class 2 laser products | |||||
| Output | 600μW | |||||
| Light point size (at datum distance) | Approx. 200×750μm | Approx. 550×1750μm | Approx. 0.4×1.4mm | Approx. ø0.5mm | Approx. ø1.6mm | |
| Linearity*1*2 | 25 to 35 mm: ±0.1% F.S. | 55 to 75mm：±0.1%F.S. | 80 to 120 mm：±0.15%F.S. | 160 to 440 mm：±0.25%F.S. |
200 to 600 mm：±0.25%F.S. 200 to 1000 mm：±0.5%F.S. |
|
| Repetition accuracy (at reference distance)*3 | 1μm | 2μm | 4μm | 30μm | 50μm | |
| Sampling period | 0.33/1/2/5ms switching | |||||
| Temperature Characteristics*2 | 0.05% F.S./℃ | 0.06% F.S./℃ | 0.06% F.S./℃ | 0.08% F.S./℃ | ||
| Enclosure protection class | IP67 | |||||
| Ambient luminosity*4 | Incandescent: 5000 lux | Incandescent: 7500 lux | Incandescent: 5000 lux | |||
| Ambient temperature | -10 to +50 °C (non-condensing, non-freezing) | |||||
| Ambient humidity | 35 to 85% RH (non-condensing) | |||||
| Vibration resistance | 10 to 55 Hz double amplitude 1.5 mm 2 hours in each direction X, Y, Z | |||||
| Material | Housing: PBT Indicator cover: PC Lens cap: Glass Cable: PVC | |||||
| Weight | Approx. 150g | |||||
| Mounting Bracket | OW-LM001 | OW-LM002 | OW-LM003 | |||
| Model | NPN | LM-1000N | LM-1050N |
| PNP | LM-1000P | LM-1050P | |
| NPN/PNP | LM-1000 | LM-1050 | |
| Main odule/Expansion Module | Main odule | Expansion Module | |
| Mounting Type | DIN rail mounting | ||
| Sensor Head Compatibility | Available | ||
| Monitor | Minimum display unit | LM-030: 1 μm, LM-065/LM-100: 2 μm, LM-300: 10 μm, LM-600: 50 μm | |
| Display range | LM-030/LM-065/LM-100: ±99.999mm to ±99mm (Variable in 4 levels), LM-300/LM-600: ±999.99mm to ±999mm (Variable in 3 levels) | ||
| Display rate | Approx. 10 times / sec. | ||
| Analog Voltage Output | ±5V, 1 to 5V, 0 to 5V Output Impedance 100Ω | - | |
| Analog Current Output | 4 to 20 mA Maximum Load Resistance 350Ω | ||
| Control input | Channel switching input |
NPN: ON when connected to 0V, OFF when connected to 24V; PNP: ON when connected to 24V, OFF when connected to 0V; |
|
| Zero drift input | |||
| Transmit stop input | |||
| Timer input | |||
| Reset input | |||
| Control output*¹ | Judgment Output | Open collector, 50mA max (NPN/PNP; normally open/closed, switchable) | |
| Alarm output | Open collector, 50mA max (NPN/PNP; normally closed, non-switchable) | ||
| Electric power source | Supply voltage*¹ | 10 to 30 VDC including ripple (P-P) 10 percent | Power supply through the main unit |
| Power consumption without load) | 1950 mW or less (at 30 V, 65 mA maximum) | 1800 mW or less (at 30 V, 60 mA max.) | |
| Ambient Temperature | -10 to + 50 °C (non-freezing) | ||
| Ambient Humidity | 35 to 85% RH (non-condensing) | ||
| Vibration resistance | 10 to 55 Hz, 1.5 mm dual amplitude, 2 hours each for X, Y, and Z axes | ||
| Material | Case: Polycarbonate Key: Polyacetal Cable: PVC | ||
| Weight (including accessories) | Approx. 150g | Approx. 140g | |
| Model | OW-EC2A |
| Standard | IEEE802.3u (100BASE-TX) |
| Transmission speed | 100 Mbps (100BASE-TX) |
| Transmission medium | STP or Category 5+ UTP cable |
| Distance between nodes | 100 m |
| Communication port | RJ-45×2 |
| Supported Functions | Loop communication, CoE supporting message communication |
| Connectable devices | Controller |
| Number of Connectable Devices | Maximum 16 units |
| indicator light | Power indicator (PWR): green, Run indicator (RUN): green, Error indicator (ERR): red |
|
|
Sensor communication indicator: Green, Link/activity indicator: Green |
| Supply Voltage | 24VDC including 10% ripple (p-p), powered by controller |
| Power consumption | 1100mW or less (45mA or less at 24V) |
| Ambient Temperature | -20 to +55°C (no freezing) |
| Relative temperature | 35 to 85% RH (non-condensing) |
| Vibration resistance | 10 to 55 Hz Bidirectional amplitude 1.5 mm 2 hours in each direction X, Y, Z |
| Pollution level | 2 |
| Material | Polycarbonate |
| Weight | 48g |
| Model | OW-PN2 |
| Standard | IIEEE802.3u (100BASE-TX) |
| Transmission speed | 100 Mbps (100BASE-TX) |
| Transmission medium | STP or Category 5+ UTP cable |
| Distance between nodes | 100 m |
| Communication port | RJ-45×1 |
| Supported Functions | Cyclic communication (data I/O communication) |
| Update Time | 2 to 512 ms |
| GSDML Version | V2.3 |
| Protocol | LLDP, DCP |
| Connectable devices/units | 16 units |
|
|
SF: (red lamp) On - system fault detected; Off - no PROFINET faults |
|
|
RDY: (green) On - communication function is ready; Off: module function is abnormal |
| Indicator light | D-bus: (green light) On - module communication is normal, blinking - module communication is abnormal |
|
|
BF: (Red) Blinking - abnormal bus communication; Off - normal bus communication |
|
|
Link/Activity Indicator |
| Supply Voltage | 24VDC including 10% ripple (p-p) powered by controller |
| Power consumption (communication module body) | 1200mW or less (50mA or less at 24V) |
| Ambient temperature | -20 to +55°C (no freezing) |
| Relative temperature | 35 to 85% RH (non-condensing) |
| Vibration resistance | 10 to 55 Hz Bidirectional amplitude 1.5 mm 2 hours in each direction X, Y, Z |
| Material | Polycarbonate |
| Weight | 45g |
| Model | OW-RS1A |
| Supply Voltage | 24VDC includes 10% ripple (p-p) Powered by controller |
| Power consumption | 400mW or less (15mA or less at 24V) |
| Number of sensor amplifiers that can be connected | 16 units |
| Indicator light | 2 communication status indicators (green), alarm indicator (red), power indicator (green) |
| Ambient temperature | -10 to +55°C (no freezing) |
| Relative humidity | 35 to 85%RH (non-condensing) |
| Vibration resistance | 10 to 55Hz, compound amplitude 1.5mm, 2 hours in each XYZ axis |
| Communication method | Full Duplex(RS232)/Half Duplex(RS485) |
| Synchronization method | Asynchronous |
| Transmission code | ASCII or MODBUS (factory default: MODBUS) |
| Communication speed (baud rate) | 2400, 4800, 9600, 19200, 38400 bits/sec (factory default: 38400 bits/sec) |
| Data length (bits) | 8 bits |
| Parity check | None, Even, Odd, (Factory Default:None) |
| Stop length (bits) | 1 bit |
| Data delimiter | ASCI Receive:Recognize CR or CR+LF ASCII Transmit:Send CR+LF MOBUS Transmit Receive:CRC Check Digit |
| Material | Polycarbonate |
| Weight | Approx. 40 g |
Quick Helpline
Copyright © 2021 Shenzhen SENPUM Electric Co., Ltd. All Rights Reserved
Room 2905, Building A, Yangguang Kechuang Center, Nanxin Road, Nanshan District, Shenzhen, Guangdong, China
Download
Technical Specs
GD ICP No. 16120534-2
GD GongAn Beian No. 44030502001756
Download
Delete all items