Model | NPN/PNP | LM-1000 |
Main odule/Expansion Module | Main odule | |
Mounting Type | DIN rail mounting | |
Sensor Head Compatibility | Available | |
Monitor | Minimum display unit | LM-030: 1 μm, LM-065/LM-100: 2 μm, LM-300: 10 μm, LM-600: 50 μm |
Display range | LM-030/LM-065/LM-100: ±99.999mm to ±99mm (Variable in 4 levels), LM-300/LM-600: ±999.99mm to ±999mm (Variable in 3 levels) | |
Display rate | Approx. 10 times / sec. | |
Analog Voltage Output | ±5V, 1 to 5V, 0 to 5V Output Impedance 100Ω | |
Analog Current Output | 4 to 20 mA Maximum Load Resistance 350Ω | |
Control input | Channel switching input | NPN: ON when connected to 0V, OFF when connected to 24V; PNP: ON when connected to 24V, OFF when connected to 0V; |
Zero drift input | ||
Transmit stop input | ||
Timer input | ||
Reset input | ||
Control output*¹ | Judgment Output | Open collector, 50mA max (NPN/PNP; normally open/closed, switchable) |
Alarm output | Open collector, 50mA max (NPN/PNP; normally closed, non-switchable) | |
Electric power source | Supply voltage*¹ | 10 to 30 VDC including ripple (P-P) 10 percent |
Power consumption without load) | 1950 mW or less (at 30 V, 65 mA maximum) | |
Ambient Temperature | -10 to + 50 °C (non-freezing) | |
Ambient Humidity | 35 to 85% RH (non-condensing) | |
Vibration resistance | 10 to 55 Hz, 1.5 mm dual amplitude, 2 hours each for X, Y, and Z axes | |
Material | Case: Polycarbonate Key: Polyacetal Cable: PVC | |
Weight (including accessories) | Approx. 150g |
Quick Helpline