Home > Products > Laser Displacement Sensors > Separate Amplifier > CMOS Type Laser Displacement Sensor > LM Series > Model > OW-RS1A

Laser Displacement Sensors

CMOS Type Laser Displacement SensorLM Series

Other Models

OW-RS1A

Specifications

Model OW-RS1A
Supply Voltage 24VDC includes 10% ripple (p-p) Powered by controller
Power consumption 400mW or less (15mA or less at 24V)
Number of sensor amplifiers that can be connected 16 units
Indicator light 2 communication status indicators (green), alarm indicator (red), power indicator (green)
Ambient temperature -10 to +55°C (no freezing)
Relative humidity 35 to 85%RH (non-condensing)
Vibration resistance 10 to 55Hz, compound amplitude 1.5mm, 2 hours in each XYZ axis
Communication method Full Duplex(RS232)/Half Duplex(RS485)
Synchronization method Asynchronous
Transmission code ASCII or MODBUS (factory default: MODBUS)
Communication speed (baud rate) 2400, 4800, 9600, 19200, 38400 bits/sec (factory default: 38400 bits/sec)
Data length (bits) 8 bits
Parity check None, Even, Odd, (Factory Default:None)
Stop length (bits) 1 bit
Data delimiter ASCI Receive:Recognize CR or CR+LF ASCII Transmit:Send CR+LF MOBUS Transmit Receive:CRC Check Digit
Material Polycarbonate
Weight Approx. 40 g

You may also be interested in the following informationView more>>


Recommended Content

Home > Products > Laser Displacement Sensors > Separate Amplifier > CMOS Type Laser Displacement Sensor
×

Login

Forgot your password/Username?Register